2016 Bush Hog 1D78

Call For Price

Bush Hog



Bush Hog’s line of lift disc harrows is designed to expand your tractor’s productivity potential! Whether you are a gardener, small farmer, wildlife manager, landscaper, operate a nursery or simply someone looking to break up the ground, the heavy duty frames and the heat-treated notched disc blades of Bush Hog® lift disc harrows make them the right choice for the job. The three disc harrow series in the Bush Hog® line are designed to fit tractors from 35 to 95 horsepower, giving you several choices to properly fit your tractor and application. Easy-to-adjust front and rear gangs allow you to change from light tilling to more aggressive cutting action with a simple pull of a pin and repositioning of the gangs. The sky, well actually the dirt, is the limit when using a Bush Hog® lift disc harrow to solve your groundbreaking needs.

Performance Features
  • Adjustable gang angles, front and rear, using an easy-tograsp handle
  • Cat 1 standard and quick hitch on the 1D and 2D series, along with Cat 1 and 2 standard and quick hitch on the 3D series
  • Variable Blade Spacings Available: 9” front and rear gangs for tough-to-cut “New Ground” • 7 1/2 in. front and rear gangs for finer soil finishing • 9 in. front gangs / 7 1/2 in. rear gangs–the best of both worlds
Construction Features
  • Square and rectangle tube steel frames and gang tubes
  • Self-aligning, sealed ball bearings
  • Notched disc blades for maximum cutting action
  • 1 in. square, high carbon steel gang axle on the 1D and 2D series, with a 1 1/8 in. square, high carbon steel gang axle used on the 3D series
  • Available in tractor colors
  • Optional disc scrapers
Product Features
  • Bearing hangers reinforces with gussets
  • Easy-to-grasp handle for simple gang adjustment
  • Notched discs for maximum cutting action
  • Drawbar Hp Requirement: 35 HP
  • Hitch Type: Cat. 1 Std and QH
  • Max. Cultivation Width: 78 in.
  • Approx. Wt. Load on Each Blade: 30-32 lb.
  • Disc Blade Sizes Notched: 16 in. or 18 in.
  • Disc Blade Spacing: 9 in. Front, 7 1/2 in. Rear or 9 in. Front/Rear or 7 1/2 in. Front/Rear
  • Disc Bearing Type: Self-aligning, sealed ball bearings
  • No. of Bearings: 2 per gang
  • Forward Gang Angle Adjustment: Front Gangs - 0 deg., 7 deg., 14 deg., 21 deg.
  • Rear Gang Angle Adjustment: Rear Gangs - 7 deg., 14 deg., 21 deg.
  • Mainframe Front Tube Construction: 2 in. square tubing
  • Gang Arm Construction: 3 in. x 1 1/2 in. tubing
  • Gang Axles: 1 in. square, high carbon steel
  • Disc Scrappers: Optional



Cat. 1 Std and QH
Cutting Width
78 in.
Disc Spacing
Front: 9 in.; Rear: 7.5 in.
Disc Size
16 in.;18 in.


Related Products